|
|
|
Challenger 2000
Technical Specifications
Dimensions
|
 |
| Overall length |
19'8" / 6.0m |
|
| Beam |
8' / 2.44m |
|
| Draft |
12" / 30.5cm |
|
| Deadrise |
20° |
|
| Weight (dry) |
2,000 lbs. / 907kg |
|
| Passenger capacity |
8 person |
|
| Load limit |
1,440 lbs. / 653 kg |
|
| Water capacity |
N/A
| |
|
| Fuel capacity |
40 US gal. / 151L
| |
|
| Oil Capacity |
3 US gal. / 11.4L
| |
Engine
|
|
Engine |
Mercury M˛ Jet Drive |
|
| Type/Displacement |
250 hp OptiMax - V6 / 3.0L
240 hp EFI- V6 / 2.5L" |
|
| Horsepower |
250 hp OptiMax or 240 hp EFI |
|
| Fuel System |
250 hp OptiMax- 2-stage direct injection
240 hp EFI- Multi-point electronic fuel injection |
|
| Lubrication |
Variable ratio oil injection, gear-driven |
|
| Exhaust |
Power tuned dual-muffler, through-transom |
|
| Engine Protection Systems |
Engine overheat, low oil level, over-rev protection, low battery |
|
| Operating Range |
250 hp OptiMax 5150-5650 rpm (PCM 555 controlled)
240 hp EFI 5500-6000 rpm |
|
| Corrosion Protection |
XK360 aluminum, multi-step painting, sacrificial anodes |
Drive Unit
|
|
Jet pump type |
Mixed flow, high volume |
|
| Directional Gate |
High-thrust, twin aperture, F/N/R |
|
| Impeller |
7.25" diameter, 4-blade variable pitch stainless steel |
|
| Trim System |
Manual adjustable trim plate |
|
| Intake Grate |
"Hydro-Surge" weedless |
Electrical
|
|
Starter |
Electric |
|
| Charging System |
240 hp EFI 40 amp |
|
| Battery |
12 volt |
 Top
|
|
|